PRODUCTS

Product Category

You are here: Home » Products » PTFE Products » PTFE Processing Parts » Support Customization of Corrosion-resistant And High-temperature Resistant PTFE Linear Screws

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Support Customization of Corrosion-resistant And High-temperature Resistant PTFE Linear Screws

PTFE screw,nut,bolt
  • JSLW

Availability:

Product Description:
Introduction of PTFE bolts and nuts:Polytetrafluoroethylene is commonly known as "Plastic King". It has excellent chemical stability, corrosion resistance, airtightness, high lubrication and non-stick properties, electrical insulation and good anti-aging endurance. Polytetrafluoroethylene is a synthetic polymer material that uses fluorine to replace all hydrogen atoms in polyethylene. This material is resistant to acids, alkalis, and various organic solvents, and is almost insoluble in all solvents. At the same time, PTFE has the characteristics of high temperature resistance, and its friction coefficient is very low, so it can be used for lubrication, and it has become an ideal coating for easy-to-clean woks and water pipes.
Use Advantages:
1. High temperature resistance-the working temperature can reach 250ºC.
2. Low temperature resistance-good mechanical toughness; even if the temperature drops to -196ºC, it can maintain 5% elongation.
3. Corrosion resistance-for most chemicals and solvents, it is inert, resistant to strong acids and alkalis, water and various organic solvents.
4. Weather resistance-has the best aging life among plastics.
5. High lubrication-the lowest friction coefficient among solid materials.
6. No adhesion-it is the smallest surface tension among solid materials and does not adhere to any substances.
Product Performance:

Item Denisty Tensile Strength Elongation Dielectric Strength
Unit 2.1-2.3g/cm3 ≥15.0Mpa ≥150% 10kv/mm

Note: The above parameters are for reference only. The actual data is based on the product test data.

Product Display:IMG_4966IMG_4955IMG_4967IMG_4968
Product Packaging:运输
Factory And Equipment:工厂与设备

Our Service: 
1. Providing technical consultation.
2. Samples are free. 
3.We could customize various products with your brand logo according to your requirements. 
4. Your inquiry will be replied within 1 hours during working time,Within 24 hours when rest time. 
5.Orders will be produced exactly as request and approved samples.

6. Before shipment,our QC will have inspection to make sure the quality. 
7.We always try best to ensure every order to delivery in time. 
8.Special packaging according to request.


Previous: 
Next: 
Phone:
+86-150-5298-6567
Address:
No. 519-105, Fudan Science and Technology Park, Yangzhong City, Zhenjiang City, Jiangsu Province
About us
The factory is located in Yongsheng Industrial Zone, Baqiao Town, Yangzhong City, Jiangsu Province. It is a high-tech enterprise specializing in the research and development and production of new material products.
Latest news
Subscribe
Sign up for our newsletter to receive the latest news.
​Copyright © 2022 Jiangsu Linwei New Material Co., Ltd. All rights reserved. Support by LeadongSitemap